694 cc, 2-cylinder, air-cooled Kohler Command PRO V-Twin engine.
EXCLUSIVE T-DRIVEâ„¢ TRANSMISSION
Tandem 12cc Parker pumps-in-reservoir transmission is specifically designed for turf-care applications
In-line CoolFanâ„¢ cooling system and integrated, replaceable, high-efficiency fine-particle filter
Design directs more power to the cutting deck as power-sapping components are eliminated
HEAVY-DUTY DECK
Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge
Specially designed cutting chambers enhance airflow for better cut quality
Deck easily converts from side discharge to optional Down Dischargeâ„¢ mulching or PowerVacâ„¢ collection
Sentryâ„¢ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength
Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut
Sentryâ„¢ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion
POWERFOLD® ELECTRIC DECK LIFT
Standard on all FrontMount™ DuraMax® decks 48-inch and larger, PowerFold® is the zero-turn mower industry's first electric deck lift (introduced in 2004).
PowerFold® rotates the deck nearly 90 degrees to provide easy access to the underside of the deck for simplified maintenance and mulching package installation, plus space-saving portability and storage.
The feature also adjusts cutting height between 1.25 and 5.0 inches and controls deck lift functions using a single switch.
WARRANTY
Commercial Use: 3-year unlimited hours; limited warranty: First two years covering parts and labor; last year covering parts only.
Residential Use: 4-year or 800-hour (whichever comes first); limited warranty covering parts and labor.
ANTIVIBE POWER PLATFORM®
Isolates the engine and T-Driveâ„¢ from the operator platform for an unprecedented vibration-free experience
MINIMAL MAINTENANCE
Fewer than 10 grease points and easy top-side access to belts and filters
1,000-hour transmission fluid change intervals
Self-tensioning belts minimize cost and labor on routine maintenance
BUILT FOR LONG LIFE
Robotically-welded, high-grade steel construction and I-beam reinforcement for long-lasting durability
Centered-bearing design provides greater load-bearing capacity to easily handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts
Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance
ULTIMATE OPERATOR STATION®
The deep-cushioned, deluxe Premium Comfort Seat features a coil-spring suspension and padded lumbar support for all-day comfort. Iso-mounting eliminates vibration before it reaches the seat, and both padded seat and armrests are covered in scuff-resistant, breathable CoolTemp Cordura® fabric, which dissipates heat and won’t tear or crack with extended use.
ULTIMATE OPERATOR STATION®
Operational controls including throttle, choke and angled View-Ezeâ„¢ console and adjustable cup holder are well positioned for visibility and ease of reach
ULTIMATE OPERATOR STATION®
One- or two-handed operation with ComfortReachâ„¢ adjustable Hydra-Smoothâ„¢ dual levers that automatically return to neutral from either forward or reverse position.
VIGILANT OPERATOR PRESENCE SYSTEMâ„¢
Standard, low profile operator protection structure (OPS) with an adjustable seatbelt
Dampened steering levers that return to neutral from forward and reverse
Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position
SINGLE-FORK TAIL WHEEL
Single-fork tail wheels enhance weight distribution, improve stability and enhance castering effect when maneuvering
QUIIKCONVERTERâ„¢ IMPLEMENT CAPABILITY
Add or remove implements in minutes without tools with QuikConverterâ„¢ Implement System
Equip your out-front mower with a wide range of tools, including turf cleanup, renovation and snow removal implements that extend your productivity year-round
Videos
Videos
Options
OPTIONS
PREMIER SUSPENSION SEAT
Optional premier suspension seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 – 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.
WIDE SEAT CONVERSION KIT
Provides additional seating room for larger operators or to accommodate cell phones or pagers. Requires seat belt extension.
QUIKAJUST TILTâ„¢ LEVERS
Available for all MidMount models, optional QuikAjust Tiltâ„¢ steering levers (except 124V-41) with "no tools" adjustment provide a 9-inch range for maximum comfort and fit while maintaining natural arm and wrist positions..
EXTENDED STEERING LEVERS
Provides an additional two inches of leg clearance
SIDE DISCHARGE CONTROL KIT
Control the discharge of the mower deck to avoid putting clippings in flower beds and on sidewalks
BAR-TREAD LOW-PRESSURE TIRES
Optional low-pressure, high-flotation bar-tread tires flex with the terrain for maximum traction and minimize scuffing caused by wheel spin-out.
FLOTATION PACKAGE
Includes low-pressure tires and wide-stance, single-fork tail wheels.
TAIL WHEEL OPTIONS
Dual-fork tail wheels or wide stance single-fork tail wheels.
Michelin® X® Tweel® Airless Tail Wheels
Smooth tread, 13x6.50x6 tail wheel. Performs like a pneumatic tire, but without the inconvenience and downtime associated with flats. Not for use with PowerVac Collection Systems.
SUNSHADE CANOPY VINYL
Lightweight, water repellent, UV-resistant vinyl canopy mounts easily to OPS or ROPS to limit exposure to direct sunlight, reducing eye strain and increasing operator comfort.
SUNSHADE CANOPY ALUMINUM
Diamond-plated aluminum canopy is highly resistant to abrasions. Easily mounts to ROPS or OPS to increase operator comfort by limiting exposure to direct sunlight and reducing eye strain. Canopy tilts up and down for customized comfort. (Optional fan and light kits increase comfort and roadside visibility.)
ADJUSTABLE CUP HOLDER
An Adjustable Cup Holder locks into multiple positions to accommodate a wide range of drink sizes.
LED WORK LIGHTS
LED work lights provide improved visibility in low light situations.
YELLOW BEACON LIGHT
Yellow beacon attaches to OPS or ROPS to provide greater visibility in high-traffic areas.
ARMREST HEIGHT ADJUSTMENT SWITCH
Used in conjunction with PowerFold® electric deck lift/height adjustment, this armrest-mounted switch controls deck lift functions and adjusts cutting height between 1.0 and 4.5 inches on the go.
DOWN DISCHARGEâ„¢ MULCHING PACKAGE
The optional Down Dischargeâ„¢ mulching package with GrassMaxâ„¢ medium-lift blades cuts and recuts clippings and directs them deep into the grass bed, enriching turf and producing a beautifully manicured cut.
FULL FLOTATION DECK INSERTS
Allow for controlled side-to-side flotation of the deck in rolling terrain for a smooth, even cut.
35 SERIES DEDICATED REAR DISCHARGE DECKS
Dedicated 52-, 61- and 72-inch, extra-deep, 5.5-inch 35 Series rear discharge decks deliver revolutionary performance for applications where keeping clippings off sidewalks, driveways and parking lots is critical.
REAR DISCHARGE SHIELD KIT
Optional rear discharge shield kit converts 34R Series decks to direct clippings out the back of the deck for a smooth cut and no windrowing.
AIR DAM KIT
An optional Air Dam Kit can be installed along the front edge of most mower decks to minimize dust and dirt escaping from the front of the mower.
SPEEDTRIMMINGâ„¢ ROLLER KIT
The optional SpeedTrimming™ heavy-duty, anti-scalp roller kit for 52-inch and larger DuraMax® decks speeds close trimming near buildings, fences retaining walls and other landscaping features. Kits available for both left and right sides of cutting decks.
YOUR CHOICE OF DECKS
48-inch 33 Series out-front, side-discharge deck, which easily converts to Down Discharge® mulching or vacuum collection. Available as manual FoldUp™ deck or equipped with PowerFold® electric deck lift/height adjustment.
52-inch 34 Series DuraMax® side-discharge deck, which easily converts to Down Discharge® mulching or vacuum collection. Available as manual FoldUp™ deck or equipped with PowerFold® electric deck lift/height adjustment.52-inch 34R Series DuraMax® side-discharge deck, which easily converts to Down Discharge® mulching, rear discharge or vacuum collection. Comes standard with PowerFold® electric deck lift/height adjustment.
QUIKCONVERTER® IMPLEMENTS
Every FrontMountâ„¢ mower accepts a range of time- and labor-saving QuikConverterâ„¢ implements for even greater flexibility and productivity year-round.
POWERVAC® FRONTMOUNT COLLECTION SYSTEM
Powerful, deck-driven PowerVacâ„¢ collection systems deliver one-pass perfection every time, and are available with a wide range of twin or triple mesh bag or high-capacity metal hopper collectors.
Quik-D-Tatch® Vac drive can be removed in seconds without tools
Specifications
Specifications
Engine
Engine Type
48" 623T
Kohler Command Pro, V-Twin
52" 623T
Kohler Command Pro, V-Twin
Displacement
48" 623T
42.4 cu. in. (694 cc)
52" 623T
42.4 cu. in. (694 cc)
Lubrication
48" 623T
Pressure Lube/Filter
52" 623T
Pressure Lube/Filter
Crankshaft
48" 623T
Horizontal
52" 623T
Horizontal
Engine Cooling
48" 623T
Air
52" 623T
Air
Fuel Type
48" 623T
Gasoline - unleaded
52" 623T
Gasoline - unleaded
Fuel Capacity
48" 623T
4.0 U.S. Gal. (15.14 l)
52" 623T
4.0 U.S. Gal. (15.14 l)
Optional Fuel Capacity
48" 623T
NA
52" 623T
NA
Air Cleaner
48" 623T
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
52" 623T
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Muffler
48" 623T
Ultra-quiet, industrial type
52" 623T
Ultra-quiet, industrial type
DuraMax Decks
DuraMax® Deck
48" 623T
DuraMax®
52" 623T
DuraMax®
Mulch Kit #
48" 623T
504566
52" 623T
504567
Deck Size
48" 623T
48"
52" 623T
52"
Cutting Height Range
48" 623T
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
52" 623T
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
Deck Construction
48" 623T
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.239 in. = 3 gauge (6.07mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, over 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
52" 623T
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. †7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
Deck Blades
48" 623T
(2) 18 in. (45.7 cm) (1) 15 in. (38.1 cm)
52" 623T
(3) 18 in. (45.7 cm)
Deck Spindles
48" 623T
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap.
52" 623T
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion
Spindle Housing
48" 623T
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
52" 623T
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade Drive
48" 623T
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
52" 623T
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Deck Trimability
48" 623T
3.5 in. (8.9 cm)
52" 623T
2.5 in. (6.4 cm)
Starter & Electrical System
Battery
48" 623T
12 Volt
52" 623T
12 Volt
Starter
48" 623T
Solenoid shift
52" 623T
Solenoid shift
Ignition
48" 623T
Breakerless
52" 623T
Breakerless
Interlock System
48" 623T
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
52" 623T
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
Operator Seat
48" 623T
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
52" 623T
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
Suspension
48" 623T
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
52" 623T
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
Console-mounted Instruments
48" 623T
Low engine oil pressure and parking brake indicator lights, work lights, digital hour meter, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
52" 623T
Low engine oil pressure and parking brake indicator lights, work lights, digital hour meter, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
Work Lights
48" 623T
Optional - LED
52" 623T
Optional - LED
Hour Meter
48" 623T
Standard
52" 623T
Standard
Transmission & Steering
Transmission Type
48" 623T
T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
52" 623T
T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
Transmission Filtration
48" 623T
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
52" 623T
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
52" 623T
True zero degree, turns within own length with counter-rotating, independently powered drive wheels. Seat is pivot point.
Steering
48" 623T
One- or two-hand operation with adjustable, HydraSmooth™, dual levers that automatically return to neutral from either forward or reverse position.
52" 623T
One- or two-hand operation with adjustable, HydraSmooth™, dual levers that automatically return to neutral from either forward or reverse position.
Brakes
48" 623T
Dynamic braking through hydrostatic transmission.
52" 623T
Dynamic braking through hydrostatic transmission.
Parking Brake
48" 623T
Compression
52" 623T
Compression
Attachment Drive
48" 623T
Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
52" 623T
Telescoping PTO shaft with two high-speed U-joints, Quik-D-Tatch® coupler and heavy-duty electric Mag Stop® blade clutch/brake.
Tire Sizes
Standard Midmount Drivetire
48" 623T
NA
52" 623T
NA
Optional MidMountâ„¢Drive Tires
48" 623T
NA
52" 623T
NA
MidMountâ„¢ Front Caster Wheels
48" 623T
NA
52" 623T
NA
Standard FrontMountâ„¢ Drive Tire
48" 623T
20x10.00x8 turf tread, 4-ply rated abc abc
52" 623T
20x10.00x8 turf tread, 4-ply rated
Optional FrontMountâ„¢ Drive Tire
48" 623T
21 x 11.00-8, bar tread, 4-ply rated 20 x 10-8 turf tread 22 x 11-10 Turf tread 22 x 11-12 Airless Turf Tweel
52" 623T
21 x 11.00-8, bar tread, 4-ply rated 20 x 10-8 turf tread 22 x 11-10 Turf tread 22 x 11-12 Airless Turf Tweel
FrontMountâ„¢ Single Fork Tail Wheel Size
48" 623T
13x6.50x6 rib tread, pneumatic
52" 623T
13x6.50x6 rib tread, pneumatic
FrontMountâ„¢ Wide Stance Single Fork Tail Wheel Size
48" 623T
NA
52" 623T
NA
FrontMount Deck Tire
48" 623T
9x3.50x4 (flat proof), 4-ply rated
52" 623T
9x3.50x4 (flat proof), 4-ply rated
Dimensions
Height, Seatback
48" 623T
43.5 in. (110.5 cm)
52" 623T
43.5 in. (110.5 cm)
Height Seat Cushion
48" 623T
26.0 in. (66.0 cm)
52" 623T
26.0 in. (66.0 cm)
Height ROPS
48" 623T
63.0 in. (160.0 cm)
52" 623T
63.0 in. (160.0 cm)
Mower+Deck Length
48" 623T
100.0 in. (254.0 cm)
52" 623T
101.0 in. (256.5 cm)
Mower+Deck - Deck Folded
48" 623T
80.0 in. (203.2 cm)
52" 623T
85.5 in. (217.2 cm)
Deck Width - Side Discharge
48" 623T
61.5 in. (156.2 cm)
52" 623T
65.5 in. (166.5 cm)
Deck Width - Side Discharge 41"
48" 623T
NA
52" 623T
NA
Deck Width - Side Discharge 42"
48" 623T
NA
52" 623T
NA
Deck Width - Side Discharge 48"
48" 623T
61.5 in. (156.2 cm)
52" 623T
NA
Deck Width - Side Discharge 52"
48" 623T
65.5 in. (166.5 cm)
52" 623T
65.5 in. (166.5 cm)
Deck Width - Side Discharge 61"
48" 623T
NA
52" 623T
NA
Deck Width - Side Discharge 72"
48" 623T
NA
52" 623T
NA
Deck Width - Mulching
48" 623T
49.5 in. (125.7 cm)
52" 623T
53.5 in. (135.9 cm)
FrontMountâ„¢ Width
48" 623T
47.0 in. (119.4 cm)/59.0 in. (149.9 cm)
52" 623T
47.0 in. (119.4 cm)/59.0 in. (149.9 cm)
FrontMountâ„¢ Wheelbase
48" 623T
46.0 in. (116.8 cm)
52" 623T
46.0 in. (116.8 cm)
Weight
Weight
Power Unit+Deck (uncrated)
48" 623T
1040 lbs. (471.7 kg)
52" 623T
1120 lbs. (508.0 kg)
Weight FrontMountâ„¢ Power Unit only
48" 623T
750 lbs. (340.2 kg)
52" 623T
750 lbs. (340.2 kg)
Weight
Mower Deck
48" 623T
290 lbs. (131.5 kg)
52" 623T
370 lbs. (167.8 kg)
Weight Mulch Kit
48" 623T
25 lbs. (11.3 kg)
52" 623T
29 lbs. (13.2 kg)
Engine
48" 623T
52" 623T
Engine Type
Kohler Command Pro, V-Twin
Kohler Command Pro, V-Twin
Displacement
42.4 cu. in. (694 cc)
42.4 cu. in. (694 cc)
Lubrication
Pressure Lube/Filter
Pressure Lube/Filter
Crankshaft
Horizontal
Horizontal
Engine Cooling
Air
Air
Fuel Type
Gasoline - unleaded
Gasoline - unleaded
Fuel Capacity
4.0 U.S. Gal. (15.14 l)
4.0 U.S. Gal. (15.14 l)
Optional Fuel Capacity
NA
NA
Air Cleaner
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Heavy-duty, remote mounted, cyclonic, dual element air filtration.
Muffler
Ultra-quiet, industrial type
Ultra-quiet, industrial type
DuraMax Decks
48" 623T
52" 623T
DuraMax® Deck
DuraMax®
DuraMax®
Mulch Kit #
504566
504567
Deck Size
48"
52"
Cutting Height Range
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
1.25 to 5.0 in. (3.2 cm to 12.7 cm)
Deck Construction
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.239 in. = 3 gauge (6.07mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, over 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.269 in. †7.6% thicker than 0.25 in. (6.35 mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, 1/2 inch thick in stress zones. Geometrically engineered design with 7-gauge skirts withstands the brunt of commercial mowing. Anvil-edge design with o.5 in. (12.7 mm) reinforcement on front edge of deck.
Deck Blades
(2) 18 in. (45.7 cm) (1) 15 in. (38.1 cm)
(3) 18 in. (45.7 cm)
Deck Spindles
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap.
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion
Spindle Housing
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade Drive
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Deck Trimability
3.5 in. (8.9 cm)
2.5 in. (6.4 cm)
Starter & Electrical System
48" 623T
52" 623T
Battery
12 Volt
12 Volt
Starter
Solenoid shift
Solenoid shift
Ignition
Breakerless
Breakerless
Interlock System
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
48" 623T
52" 623T
Operator Seat
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
Premium Comfort Seat, embroidered logo, iso-mounted, high-back, deep-cushioned, foam-padded CoolTemp Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional CoolTemp Cordura-covered Premier Suspension Seat.
Suspension
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
AntiVibe PowerPlatform™ with iso-mounted seat and footrest
Console-mounted Instruments
Low engine oil pressure and parking brake indicator lights, work lights, digital hour meter, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
Low engine oil pressure and parking brake indicator lights, work lights, digital hour meter, ignition and push/pull PTO switches.
Choke integrated with throttle lever.
Work Lights
Optional - LED
Optional - LED
Hour Meter
Standard
Standard
Transmission & Steering
48" 623T
52" 623T
Transmission Type
T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
T-Drive™ hydrostatic transmission with tandem 12 cc Parker pumps-in-reservoir, in-line CoolFan™ for cooling efficiency, design-matched Parker high-torque wheel motors. AntiVibe Power Platform® reduces vibration for the operator.
Transmission Filtration
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.
Integrated, replaceable, high-efficiency, fine-particle filter / Grasshopper CoolTemp Hydro-Max™ fluid withstands high and low temperature extremes for 1,000 hour change intervals.